Beschreibung
Gamut Fret Gut / Bunddarm – 120 cm – varnished / lackiert
Made from ‚Treble Gut‘ up to diameter 0.95 – made from ‚Lyon Gut‘ for diameters higher than 0.95
Fret gut made of beef serosa for tying frets onto historical instrument necks, such as lutes and viols, comes in the standard (48″, 120cm) length. How many frets you will get out of each length depends on how wide the neck of your instrument is, and whether you are using double or single frets.
The usual custom for gauging frets is to have the thickest fret be the first fret — the one nearest the nut — and then have each subsequent fret decrease by 0.05mm. Using this system, the first fret on a lute would be 1.00mm, the second fret 0.95mm, the third fret 0.90mm, and so on. On most lutes the thinnest size of fret that is practical is 0.65mm, so depending on the number of tied frets required by your instrument, you may need to use one, two, or three of the 0.65 frets to complete the fretting.
Natural strings are hand-rubbed with a light oil. Varnished strings have three coats of finish before being hand polished with the oil. There is an additional charge for varnished strings. The string comes with plain, unknotted ends.
Frets may be purchased individually or in a set. We package three sets of frets:
- Renaissance Lute Fret Pack contains eight sizes of frets: 1.00mm, .95mm, .90mm, .85mm, .80mm, .75mm, .70mm, and .65mm
- Baroque Lute Fret Pack contains contains ten sizes: 1.20mm, 1.15mm, 1.10mm, 1.05mm, 1.00mm, .95mm, .90mm, .85mm, .80mm, and .75mm
- Viol Fret Pack contains seven frets: 1.20mm, 1.15mm, 1.10mm, 1.05mm, 1.00mm, .95mm, and .90mm
